Many compressed air users require clean and dry compressed air. Particle, residual oil content and humidity determine the quality of the compressed air.

Series 130 is a new generation of laser particle counters optimized for applications in compressed air or compressed gases. With quality in mind and with the knowledge of costumers needs this instrument is designed for continuous operation 24 hours, 7 days a week. Depending on the selected model there is sensitivity available from 0.1 µm up to 5.0 µm. S 130 can fulfill the requirements stipulated in the compressed air standard ISO 8573-4. The measurement values represent the particle counts per ft³, l, m³ or alternatively in µg/m³. Settings can be done through the integrated display, our external display or through the service software.

Compressed air applications

• Medical air
• Pharmaceuticals
• Breathable air
• Marine air
• Food and beverage
• Medical engineering
• High speed trains
• Semiconductors fabs
• Conveyance of hygroscopic food
• High tech processes
• Electronics industry

Features

• Easy connection to compressed air through 6mm quick-connector
• Can be used as portable as well as stationary instrument
• Particle sizes from 0.1 ... 5.0µm (depending on model)
• Optional display
• Measures according to ISO 8573-4
• Output signals: RS-485/Modbus/RTU, SDI (internal signal), Relay switch (NO)
• Connectable to our displays  and data loggers as well as third parties displays and control units

• Technical data

  Measuring medium:     Compressed air and gases free of corrosive, aggressive, caustic and flammable constituents
  Models:     S 130-3: 3 channels: d: 0.3 < d ≤ 5.0 μm
                      S 130-5: 3 channels: d: 0.3 < d ≤ 5.0 μm with display & logger
                      S 132-8: 3 channels: d: 0.1 < d ≤ 5.0 μm
                      S 132-9: 3 channels: d: 0.1 < d ≤ 5.0 μm with display & logger  Efficiency:     50% (per JIS)
  System pressure:     0.2 ... 0.8 MPa
  Flow rate:                  S 130: 2.83 l/min
                                      S 132:  2.83 l/min
  Sampling rate:          One sample per minute
  Calibration:               NIST traceable
  Measuring unit:         Particle counts per ft3, l of m3, te selectable concentration in µg/m3
  Gas connection:       6 mm quick connect
  Electrical connection: M12 connector
  Display & Data Logger: 5" touch screen, 100 million values  (optional)
  Gas temperature:     0 ... 40ºC (at inlet)
  Ambient conditions:     10 ... 4070ºC
  Transport temperature:     -30...+70ºC
  Output signal:     RS-485, Modbus/RTU SDI (internal signal) 4 ... 20 mA, Alarm relay
  Power supply:     24 VDC, 5 W
  Application:     Downstream of filters wherever upstream drying and filtration is applied
  Casing/dimensions:     PC, Al alloy,

                                            Sigma 130  271 x 205 x 91 mm

                                            Sigma 132  300 x 240 x 120 mm
  Rating:     IP65
  EMC:     According to IEC 61326-1
  Settings:     Various sensor settings can be performed through the related service software
  Weight:     1900 g

Measuring compressed air particles to ISO 8573 class 1.2.1

Sigma132,(order 1308)  particle counter for compressed air, size range d: 0.1 < d ≤ 5.0 μm
Sigma132,(order 1309)  particle counter for compressed air, size range d: 0.1 < d ≤ 5.0 μm, with display, logger.

These models can be used to cover the requirements of class 1.2.1