Compressed Air Particle Counter

Series 130 is a new generation of laser particle counters optimized for applications in compressed air or compressed gases. With quality in mind and with the knowledge of costumers needs this instrument is designed for continuous operation 24 hours, 7 days a week. Depending on the selected model there is sensitivity available from 0.1 µm up to 5.0 µm. S 130 can fulfill the requirements stipulated in the compressed air standard ISO 8573-4. The measurement values represent the particle counts per ft3, l, m3 or alternatively in µg/m3. Settings can be done through the integrated display, our external display or through the service software.

Compressed air applications

  • Medical air
  • Pharmaceuticals
  • Breathable air
  • Marine air
  • Food and beverage
  • Medical engineering
  • High speed trains
  • Semiconductors fabs
  • Conveyance of hygroscopic food
  • High tech processes
  • Electronics industry


  • Easy connection to compressed air through 6mm quick-connector
  • Can be used as portable as well as stationary instrument
  • Particle sizes from 0.1 ... 5.0µm (depending on model)
  • Optional display
  • Measures according to ISO 8573-4
  • Output signals: RS-485/Modbus/RTU, SDI (internal signal), Relay switch (NO)
  • Connectable to our displays  and data loggers as well as third parties displays and control units

Technical data

Measuring medium:     Compressed air and gases free of corrosive, aggressive, caustic and flammable constituents
Models:     S 130-3: 3 channels: d: 0.3 < d ≤ 5.0 μm
                    S 130-5: 3 channels: d: 0.3 < d ≤ 5.0 μm with display & logger
                    S 132-8: 3 channels: d: 0.1 < d ≤ 5.0 μm
                    S 132-9: 3 channels: d: 0.1 < d ≤ 5.0 μm with display & logger

Counting efficiency:     50% (per JIS)
System pressure:     0.2 ... 0.8 MPa
Flow rate:                  Sigma 130: 2.83 l/min internal flow control
                                    Sigma 132:  2.83 l/min internal flow control
Sampling rate:          One sample per minute
Calibration:               NIST traceable
Measuring unit:         Particle counts per ft3, l of m3, te selectable concentration in µg/m3
Gas connection:       6 mm quick connect
Electrical connection: M12 connector
Gas temperature:     0 ... 40ºC (at inlet)
Ambient conditions:     10 ... 4070ºC
Transport temperature:     -30...+70ºC

Display & Data Logger: 5" touch screen, 100 million values  (optional)
Output signal:     RS-485, Modbus/RTU SDI (internal signal) 4 ... 20 mA, Alarm relay
Power supply:     24 VDC, 5 W
Application:     Downstream of filters wherever upstream drying and filtration is applied
Casing/dimensions:     PC, Al alloy,

                                          Sigma 130  271 x 205 x 91 mm

                                          Sigma 132  300 x 240 x 120 mm
Classification:     IP65
EMC:     According to IEC 61326-1
Settings:     Various sensor settings can be performed through the related service software
Weight:     1900 g